Digital TV Guides

Digital TV setup guide

Digital TV setup

Updated: Wednesday 25 February, 2009

By becca.talbot@consumerchoices.co.uk

By 2012 the UK will have switched to digital, and the last of the old analogue signals will have been switched off. If you haven’t bought the necessary hardware to unscramble the new digital signals, you won’t be able to watch TV any more. Here’s our essential guide to setting up your digital TV hardware.

Advertisement: Article continues below
Visit VirginMedia.co.uk
Virgin HD deal
of the month
FREE installation
+ FREE HD Box
Go
Visit Sky.com
Get Sky TV for only £21.50
+ FREE Sky+ box
+ FREE £25 M&S Voucher
+ FREE standard set-up
Go

What will I need to receive digital TV?

This all depends on what kind of service you want, how much you want to pay and what you want to do with it.

If you want to go for the cheapest possible option then you can simply buy a set-top box, which start from as little as £20, and watch the Freeview channels. Alternatively, you could buy an integrated digital TV set, which is more expensive but an option if you’re already in need of a new TV.

You also need to bear in mind that your old VCR won’t work in the same way after the digital switchover and if you want to watch one channel while recording another, you’ll have to buy a digital TV recorder (DTR). DTRs are more expensive than standard set-top boxes but they do work as a digital TV receiver too, so you don’t need to buy both.

If you want more than Freeview, you could join Sky (www.sky.com), Virgin Media (www.virginmedia.com) or another provider. A subscription will cost more and commit you to a contract, but you’ll have access to more channels and your provider will also supply and install your hardware. Compare Digital TV subscriptions.

How do I setup Freeview?

Setting up Freeview is very easy, but if you are worried and don’t want to do it yourself, then your retailer should be able to provide assistance installing your hardware. There will probably be a cost for this though.

You may be eligible for installation help from the Government’s Help Scheme (see useful links) if you’re over 75 or are registered disabled - you’ll be contacted nearer the time of the switchover if you are eligible.

However, if you’re not eligible for Government help and don’t want to pay out for installation, don’t despair - setting up your digital receiver is not difficult. Just follow these instructions:

  • Connect your aerial to the “RF in” socket on the back of your set-top box
  • Connect the “RF out” on the back of the set-top box to the “RF in” on the back of your TV (if your set-top box has a “RF out” socket)
  • If you have two scart sockets on the back of your TV: connect the “TV scart” on the back of your set-top box to scart number one on the back of your TV
  • Connect scart number two from the back of your TV to your DVD/VCR
  • If you have only one scart socket on the back of your TV: connect the “TV scart” on the back of your set-top box to scart number one on the back of your TV
  • Connect the VCR scart at the back of your set-top box to your DVD/VCR

What if I don’t have a scart socket on the back of my TV?

If you don’t have a scart socket at the back of your TV you can still connect providing your set-top box has a “RF out” socket.

  • Connect your aerial to the “RF in” socket on the back of your set-top box
  • Connect the “RF out” on the back of the set-top box to the “RF in” on the back of your TV
  • Connect the VCR scart at the back of your set-top box to your DVD/VCR

Bear in mind that this is not an ideal option and most DVD digital boxes and DTRs will need a scart connection.

Registered Address: Third Floor, High Holborn House, 52-54 High Holborn, London, WC1V 6RL Company Reg No:05341159
Copyright © 2006-2012 Digitalchoices.co.uk. All rights reserved. (v5.73.01)